Rope Shovel Dippers

MAK-BLOK components for dippers can be selected based on application and supplied individually or as custom selected kits.

Rope shovel dippers are often subject to impact forces that are not present in excavators, so liner selection must be done carefully with these loads in mind.

In order to provide lasting solutions to these issues, Makuri has pioneered the use of grouting technology when lining these buckets, and this is complemented by our MAK-Blok wear protection systems. Common problem areas such as damage to “Dutchman” style locking systems have been successfully solved by Makuri.

 

Typical Problems

Accordion
  • Poor wear performance
  • Mismatched liner wear rates results in partial liner changes
  • Premature failure of liners in high wear areas
  • Reduced carrying capacity due to liner weight

Makuri Technology have tailored a comprehensive range of product solutions to resolve these issues. Please contact us to find out how these can benefit your company.

Enquire About This Product

  • This field is for validation purposes and should be left unchanged.

MAK-MEGA CHOK BLOK
1 x Mega size

MAK-LIP & CHEEK PROTECTORS
These are a 3-component system that can replace all types of Wing and Cheek Shrouds. They can also be used individually as wear blocks in other areas as best suited.

MAK-TRAK BLOKS
These come in 6 x custom sizes including Single and Double widths in Light, Medium and Heavy sections. They can be used individually or in conjunction to form individual or continuous wear protection on flat and internal and external radiused surfaces.

MAK-PLUG PLATE
6 Custom sized wear plates complete with welding plug holes located in the center area.

MAK-TAPERED PLATES
To allow for wear plates to be fitted internally and externally to the front upper areas of dippers and other tapered areas requiring protection.

MAK-DIPPER BLOKS
Radiused wear blocks to allow wear liners to be fitted to the tighter external radiused areas at the front and rear sections on the P&H 4100 dipper body.

MAK-DEFLEKTOR
Comes in 2 types to protect Dutchman locking systems and Reducer door bump stops.

MAK-EDGE PROTECTORS
Typically used as single pieces only.

MAK-BARS
7 x Standard bar sizes.

MAK-BUTTONS
4 x Standard Button sizes.

This range of options has been provided to allow for the end user or repairer to select the coverage design that best suits the application.

Makuri have created liner packages for the following models of rope shovel dippers:

  • 15m³ HITACHI EX2600
  • P&H 4100 Equalizer

High Performance Parts Specialists
News

News
& Events

Our news items are regularly updated, so check back often

All News
Contact

Get in Touch

Contact Makuri to discuss how we can help you

  • This field is for validation purposes and should be left unchanged.
Contact

1 North Bridge Road #02-34.
High Street Centre. Singapore (179094)
+65 6872 5040
generalenquiries@makuritech.com