Chute Liner Mounting Options

Fixing options to suit all areas

Makuri can supply a wide range of mounting options to suit existing site fitment practices, and can custom-design additional systems to suit individual requirements. Proprietary systems such as our Bolt in From the Back system allow for improved installation safety and provide a convenient condition monitoring method, while our unique high tensile studs resolve common issues with overtensioning that can occur with commonly available low-tensile welded studs.

Typical Problems

Accordion
  • Bolting system is difficult to install and requires personnel at both sides of the chute
  • Liners fall out after bolt head wears off
  • Damaged bolts are difficult to remove from the chute & require cutting
  • Liners need to be removed early to avoid bolt failures

Makuri Technology have tailored a comprehensive range of product solutions to resolve these issues. Please contact us to find out how these can benefit your company.

Enquire About This Product

  • This field is for validation purposes and should be left unchanged.

Pick and mix the best options that work for you with existing, modified or new installations.

MAK-Safe Bolt in From The Back

  • Allows for the full life of the liner to be obtained
  • Allows for flat packing
  • Fast, safe and versatile mounting and lifting options
  • Simple condition monitoring
  • Can be used with Makuri’s 5-step installation system

MAK-CB Bolts (Capped Bolts)

  • Unique Makuri bimetallic bolts with MAK-Hard white iron caps
  • Prevents wear to the structural part of the bolt
  • Prevents streaming wear in the bolting hole
  • Allows for flat packing

MAK-FT Bolts (Fishtail Bolts)

  • Makuri liners can be manufactured to suit any bolt profile
  • Fishtail bolts are readily available and do not turn inside the hole
  • Allows for some degree of misalignment
  • Liners can be flat packed

MAK-HT Studs (High Tensile)

  • Provides for simple installation, but requires additional space for packing
  • Weld-free design ensures tensile strength of studs is maintained
  • Allows for studs to be fully tensioned in critical applications

MAK-CS Bolts (Countersunk)

  • In some applications, use of these can allow the full thickness of wear material to be utilised without damaging the bolt head
  • Liners can be manufactured to suit any standard bolts available on site
  • Liners can be flat packed

MAK PW Slots (Plug Weld)

  • Can be used where installation conditions do not allow for use of bolts, or where chute conditions are not acceptable for bolting

All bolting options can be supplied with Nyloc nuts, standard hardened washers, self-aligning sealing washers and self-locking washers.


High Performance Parts Specialists
News

News
& Events

Our news items are regularly updated, so check back often

All News
Contact

Get in Touch

Contact Makuri to discuss how we can help you

  • This field is for validation purposes and should be left unchanged.
Contact

1 North Bridge Road #02-34.
High Street Centre. Singapore (179094)
+65 6872 5040
generalenquiries@makuritech.com